Solutions

Construction & equipment rental

A photo showing a two stores cluster of modular welfare units

Utility cost savings on modular welfare units

Monitor energy consumption from the utility meter. Detect open or closed windows and doors to automate HVAC shut-off and schedule proactive climate control, reducing power consumption during weekends and holidays.

Go to →

A photo showing a hand holding a mobile phone with an interface with a map and multiple location pins

Track your valuables with 10,000 GPS pings

With this tracking solution, you can freely configure the GPS location frequency and thereby define the battery life that fits your unique business scenario.
A Rapid Mode feature can be activated in the event of theft to aid with recovery.

Go to →

A photo showing a close-up of a job site with an electrical cabinet and an Xtellio Remote Power Kit which is a box with two wires sticking out and industrial fittings mounted on the wire ends.

Plug in to read power consumption data

The Remote Power Kit easily plugs in between the power source and your power-consuming unit, providing consumption data in the Xtellio apps or through your own software via APIs. It couldn’t be easier to access energy consumption data.

Go to →

A photo showing an industrial container and an Xtellio Radar Xentral placed in front of it.

Optimize your job-site waste management

With Radar Xentral, you receive data on fill levels from job-site waste containers, skips, and welfare unit sludge tanks. Use these insights to optimize emptying processes, maintain an efficient workflow, and reduce the need for heavy vehicle transportation.

Go to →

A photo showing an asphalt saw and an Xtellio Gateway Xentral and three Xtellio Beacon Xenses in front of it

Track your tools and assets with wireless tags

The Xtellio Beacon Xense helps you verify that your assets are where you expect them to be. You can pair up to 10 tags with a Gateway Xentral within range, and you can pair the tags with multiple Gateway Xentrals if your equipment moves between different stations.

Go to →

A photo showing a lift used by construction workers and an Xtellio Pro Xentral in front of it

Real-time machine and equipment monitoring

The Xtellio Pro Xentral can be hardwired to the machine for location, ignition sensing, engine hours, and relay control. Pair it with the wireless Xense portfolio to expand data insights. A fully modular edge hardware for end-customer 'DataLiberation'.

Go to →

A photo showing a fuel cube standing on a construction site and an Xtellio Gateway Xentral plus an Xtellio Fuel Xense in front

Monitor fuel level, temperature, and location

With this solution, you can optimize refilling costs and reduce waste of DEF/AdBlue fluids. You can also get GPS location data on your tank to prevent misplacement and loss. The Xtellio Fuel Xense fits on a 'Rochester R3D Remote Ready' fuel gauge.

Go to →

A photo showing a construction worker pouring concrete out on a floor - in front of the photo an Xtellio Air Quality Xentral and Air Quality Xenses are placed in front of photo

Monitor the building process with sensor devices

Use Xtellio Air Quality devices to monitor job site climate conditions. For example, when is the concrete dry enough or can painters/carpenters start their work? The solution can consist of a stand-alone device or a gateway with multiple sensor points connected.

Go to →

Waste, logistics & utilities

A photo showing a cluster of permanent waste containers and an Xtellio Proxi Radar Xentral plus multiple Proxi Radar Xenses in front of it

Monitor fill level of your waste containers

Gain full control of fill levels in your permanent waste containers and container clusters. Enhance your business by reducing CO₂ emissions through optimized emptying routines, preventing overflows, and delivering better customer service.

Go to →

Read power consumption data remotely

The Remote Power Kit easily plugs in between the power source and your power-consuming unit, providing consumption data in the Xtellio apps or through your own software via APIs. It couldn’t be easier to access energy consumption data.

Go to →

Track your valuables with 10,000 GPS pings

With this tracking solution you can freely configure the GPS location frequency and thereby define the battery life that fits your unique business scenario.
A Rapid Mode feature can be activated in the event of theft to aid with recovery.

Go to →

A photo showing a truck lifting a large closed container. A man is operating the lift. In front is seen an Xtellio Radar Xentral

Optimize industrial waste management

Data on fill level from waste containers that changes location. GPS data shows where your containers are located. Use the fill level insight to optimize the emptying process and use the GPS location for logistic purposes and route planning.

Go to →

Facility Management

Photo showing an Xtellio Card Reader Xentral device and a hand with rubber gloves scans a card on the reader

Register personnel with wireless card reader

Card Reader Xentral registers employees' personal ID cards along with a timestamp. A solution requiring no wiring, Wi-Fi, mobile phones, or tech support. Data is transferred via the mobile network, enabling seamless integration into your payroll system via APIs.

Go to →

A photo showing an electrical cabinet with an Xtellio Gateway Xentral and an Xtellio Metering Xense in front

Power consumption insights and control

Access real-time consumption data directly from your utility meter and gain the ability to remotely disconnect individual fuse cabinet groups, helping to reduce energy consumption. This solution enables data collection for CO₂ emissions tracking and ESG reporting.

Go to →

A photo showing an open window and an Xtellio Gateway Xentral plus an Xtellio Magnet Xense in front

Receive data on window and door activity

Magnet Xenses paired with a Gateway Xentral records timestamps when windows and doors are opened or closed. Use these insights to prevent damage or burglary. Integrate the data into your own data management solution to set up notifications.

Go to →

A photo showing multiple utility meters and an Xtellio Metering Xentral in front

Read utility data remotely via wireless M-Bus

The Metering Xentral reads exact consumption data from your utility meter via Wireless M-Bus protocol. An onboard SIM solution transmits data to Xtellio Cloud where you can access the data from Xtellio’s applications or integrate in your own via cloudbased APIs.

Go to →

Industry 4.0 & Smart Factory

A photo showing an manufacturing environment with a machine motor and an Xtellio Remote Power Kit in front

Plug in for real-time energy consumption data

The Remote Power Kit easily plugs in between the power source and your power-consuming unit, providing consumption data in the Xtellio apps or through your own software via APIs. It couldn’t be easier to access energy consumption data.

Go to →

A photo showing a manufacturing environment with a hand operating a laptop with data graphs on screen and in front of the foto is placed an Xtellio Gateway Xentral plus multiple different Xtellio sensor devices

Easy-to-implement sensors for Industry 4.0

See how easy it is to set up an Xtellio Gateway and pair it with different Xenses to gain the insights you need. This is a fast and nearly effortless way to implement Industry 4.0 without disrupting your company's internal data structure.

Go to →

Data solution for waste management

Gain full control of the fill levels in your waste containers and container clusters. Enhance your business by reducing CO2 emissions through optimized emptying routines, preventing overflows, and delivering better customer service.

Go to →

Read power consumption data remotely

Access real-time consumption data directly from your utility meter and gain the ability to remotely disconnect individual fuse cabinet groups, helping to reduce energy consumption. This solution enables data collection for CO₂ emission tracking and ESG reporting.

Go to →

Construction & Equipment Rental

Waste, Logistics & Utilities

Facility Management

Industry 4.0 & Smart Factory

Construction & Equipment Rental

Waste, Logistics & Utilities

Facility Management

Industry 4.0 & Smart Factory

Construction & Equipment Rental

Waste, Logistics & Utilities

Facility Management

Industry 4.0 & Smart Factory

Construction & Equipment Rental

Waste, Logistics & Utilities

Facility Management

Industry 4.0 & Smart Factory

Utility cost savings on modular welfare units

Track your valuables with 10,000 GPS pings

Plug in to read power consumption data

Optimize your job-site waste management

Track your tools and assets with wireless tags

Real-time machine and equipment monitoring

Monitor fuel level, temperature, and location

Monitor the building process with sensor devices

Monitor fill level of your waste containers

Read power consumption data remotely

Track your valuables with 10,000 GPS pings

Optimize industrial waste management

Register personnel with wireless card reader

Power consumption insights and control

Receive data on window and door activity

Read utility data remotely via wireless M-Bus

Plug in for real-time energy consumption data

Easy-to-implement sensors for Industry 4.0

Data solution for waste management

Read power consumption data remotely